ADI-CON CW PLUS
PRODUCT DESCRIPTION
Basic Use: Adi-Con CW Plus is an integral waterproofing admixture for Portland cement based concrete and mortars, based on crystalline waterproofing mechanism.
Composition and Materials
Adi-Con CW Plus is a dry, free flowing powder containing a blend of inorganic and organic
chemicals, a small amount of sand and silica based materials. The reactive materials react
with lime generated by the hydration reaction of cement and "plug" the capillary porosity, making concrete watertight under water head pressure.
Click here for more information.
KEM-COTE BARRIER COTE 100
PRODUCT DESCRIPTION
Basic Use: Cem-Kote Barrier Cote 100 is a high performance, heavy duty waterproofing cement coating- thin topping. It is designed for a variety of uses in waterproofing, resurfacing of high traffic areas, or areas with high impact or abrasion resistance requirements such as in parking garages. Industrial floors, loading docks and many other. Cem-Kote Barrier Cote 100 is also used as a bonding agent in applications when dealing with high contaminated concrete, including oil contaminated concrete. In these applications a special methodology is required.
Composition and Materials
Cem-Kote Barrier Cote 100 is a high performance, Portland cement based material. It is a two component system consisting of dry powder blend (Component A) and a liquid additive, (Component B). For additional tensile strength and crack bridging, it is reinforced with the Reinforcing Fabric HD.
Click here for more information.
CEM-KOTE CW PLUS
PRODUCT DESCRIPTION
Basic Use: Cem-Kote CW Plus is a crystalline (capillary) in-depth waterproofing for new or existing water storage & treatment concrete structures, digesters, clarifiers and utility vaults. Cem-Kote CW Plus is suitable for waterproofing of retaining walls, basements, concrete slabs, swimming pools and other concrete structures.
Composition and Materials
Cem-Kote CW Plus is one component (add water only), Portland cement based coating
(slurry), containing silica based materials. Under water pressure (negative or positive), the
soluble silicate penetrates (due to osmotic pressure) into the substrate, where it reacts
with lime and forms insoluble calcium silicate crystals which "plug" the capillary pores and
waterproof the concrete while allowing the water vapor to pass.
Click here for more information.
CEM-KOTE FLEX CR
PRODUCT DESCRIPTION
Basic Use: Cem-Kote Flex CR is designed for waterproofing, repair & protection of concrete structure exposed to hydrogen sulfide
environment such as sewers, manholes, lifts stations and digesters. It is also used in
concrete restoration in thin sections where a superior flexibility, chemical resistance and
breathability are required. It protects and waterproofs structures subjected to various
chemicals, such as concrete floors, tanks, secondary containment structures and
clarifiers.
Compositions and Materials
Cem-Kote Flex CR is a highly flexible, fibrereinforced, hydraulic cement based material. It
is a two component system consisting of dry Component A and liquid Component B. For
additional tensile strength, it may be reinforced with Reinforcing Fabric HD.
Click here for more information.
CEM-KOTE FLEX ST
PRODUCT DESCRIPTION
Basic Use: Cem-Kote Flex ST is designed for positive and negative waterproofing of concrete structures in new construction and restoration. It is suitable for water and waste water tanks, secondary containment structures, tunnels, concrete slabs, balconies and patios with light to medium traffic. In new construction where a superior flexibility is required (waste water treatment facilities), Cem-Kote Flex ST is reinforced with the Reinforcing Fabric HD throughout. In restoration. Reinforcing Fabric NW is used just over the cracks to provide bridging.
Composition and Materials
Cem-Kote Flex ST is a highly flexible, fibrereinforced, breathable, cementitious shiny, consisting of dry Component A and liquid Component B.
Click here for more information.
CORO-CHEM 100
PRODUCT DESCRIPTION
Basic Use: Corro-Chem 100 exhibits a superior acid resistance and is more economical than polymer based materials such novolac or vinyl ester resin mortars. It is primarily used for protection of concrete slabs exposed to acidic spills and in secondary containment structures. It is also used in the repair of concrete floors, loading docks exposed to acids. By extension of the mortar with 3/8 in (9 mm) pea gravel or 1/4 in (6 mm) crushed granite stone, it can be used as acid resistant concrete.
Composition and Materials
Corro-Chem 100 is an inorganic cement based mortar, especially formulated for resistance to acid environments. Corro-Chem 100 is a two component system consisting of dry powder blend (component A) and liquid additive (component B).
FIBRE-PATCH OB
PRODUCT DESCRIPTION
Basic Use: Fibre-Patch OV is a fast set material, formulated to allow thin to thick overhead and vertical surfaces applications. It is suitable for balconies, ceilings, water reservoirs, tunnels, manholes, foundations, walls, abutments and other concrete structures.
Composition and Materials
Fibre-Patch OV is a one component (add water only) hydraulic cement based, polymer
modified and silica-fume enhanced, fibrereinforced mortar. The polymer modification
allows air curing after 24 hours of wet cure and adds toughness to the material, when
applied in thin sections. The pozzolan provides high resistance to chloride and
water penetration, high strength, bond and chemical resistance. The fibre reinforcement
allows a crack free application of thin to thick sections. The proprietary additives allow an
easy overhead application to 100 mm (4").
Click here for more information.
FIBRE-PATCH WP
PRODUCT DESCRIPTION
Basic Use: Fiber-Patch WP solves active water leakage problems:Basement & Retaining Walls, Man holes, Concrete Pipe Joints, Tunnels, Subways & Cisterns, Swimming Pools & Foundations.
Composition and Materials
Fibre-Patch WP is a blend of Portland and Calcium Aluminate cements, silica and
special additives. This specially designed formulation allows the product to obtain rapid
set and high strength, while stopping water flow.
Click here for more information.
FIBRE-PRIME
PRODUCT DESCRIPTION
Basic Use: A proprietary, waterborne polymer modified cement slurry that provides excellent protection of ferrous substrates. Can be used as a primer and/or finish coat in most immersed and non immersed applications. Frequently used to repair and protect rebar. The profiled surface of cured Fibre-Prime improves overhead and vertical applications of repair mortars or shot crete. It is also an excellent bonding agent for concrete and concrete repair mortars.
Composition and Materials
Fibre-Prime is a two component material, consisting of a dry Component A and a liquid
Component B. Fibre-Prime contains highly effective migrating corrosion inhibitors active
on both, anodic as well as cathodic corrosion sites.
Click here for more information.
GEM-CRETE TWM PLUS
PRODUCT DESCRIPTION
Basic Use: Gem-Crete TWM Plus is designed for waterproofing of light to medium traffic surfaces, including parking garages in new construction and restoration. It is also suitable for waste water tanks, secondary containment structures, tunnels, concrete slabs, balconies and patios. Gem-Crete TWM Plus is breathable and is totally insensitive
to substrate moisture, unlike polyurethane and epoxy membranes. It can be applied to completely water saturated concrete slab.
Composition and Materials
Gem-Crete TWM Plus is a two component, flexible, breathable, cementitious liquid applied
membrane.
Click here for more information.
GEM-PLAST FLEX ST
PRODUCT DESCRIPTION
Basic Use: Gem-Plast Flex ST is a waterproofing and finishing plaster for concrete and masonry. It is suitable for interior and exterior applications in swimming pools, floors and
walls in cold storage rooms, water reservoirs and as a wall plaster for food processing
plants.
Composition and Materials
Gem-Plast Flex ST is a dry polymer modified. Portland cement based plaster.
Click here for more information.
GEM-SEAL WA ST
PRODUCT DESCRIPTION
Basic Use: Gem-Seal WA ST (Standard Waterborne Acrylic) is a protective sealer for concrete floor. It is used to prevent dusting and allow an easy cleaning of concrete floors.
Composition and Materials
A clear, protective floor sealer for exterior and interior application. Gem-Seal WA ST is
one component, high, performance, water borne resin system.
Click here for more information.
PRIMER #300
PRODUCT DESCRIPTION
Basic Use: Primer #300 is a water borne, high performance, modified acrylic coating used
as Top Coat or Primer. It is suitable for concrete block, brick, poured or precast
concrete, stucco, wood and painted surfaces. It is highly resistant to acid rain and most airborne pollutants, making it an ideal coating for concrete and masonry walls in industrial
environments or environments with high level of solid dirt pollutants.
Composition and Materials
Primer #300 is high performance wall coating, is formulated with modified acrylic
emulsion, combined with inorganic extenders, pigments and additives providing
mildew resistance and high durability. The waterborne formula is VOC compliant. The
breathability is well balanced with the resistance to carbon dioxide diffusion.
Click here for more information.
REINFORCING FABRIC HD
PRODUCT DESCRIPTION
Basic Use: Reinforcing Fabric HD is a woven polymeric reinforcing fabric. It is specifically designed for the reinforcement of Cem-Kote Flex line of products manufactured for Bitumat by Gemite Products Inc.
Materials and Composition
Reinforcing Fabric HD is made of a high quality polymeric fiber with superior durability, resistance to Portland cement and UV resistance.
Click here for more information.
REINFORCING FABRIC NW
PRODUCT DESCRIPTION
Basic Use: Reinforcing Fabric NW is a non-woven polymeric reinforcing fabric. It is specifically designed to reinforce Cem-Kote Flex materials in applications over dynamic
(moving) cracks. It can also be used with Flex-top RM roof and Tuff-Flex wall coatings
manufactured for Bitumat by Gemite Products Inc.
Composition and Materials
Reinforcing Fabric NW is made of a high polymeric fiber with superior durability,
resistance to alkali and UV resistance. It contains integrally embedded, a tough
polymer foil, which provides the waterproofing under water head pressure.
Click here for more information.
TUFF-FLEX CA
PRODUCT DESCRIPTION
Basic Use: Tuff-Flex CA is a high performance, flexible wall coating for protection of new and restoration of cracked and deteriorated concrete, masonry and stucco. Tuff-Flex CA bridges over and seals substrate cracks due to its high elongation at ambient and very low
temperatures. Tuff-Flex CA is highly resistant to acid rain (does not contain carbonate fillers) and airborne pollutants. The water borne formula is breathable (releases water vapor from the substrate).
Composition and Material
Tuff-Flex CA is a water borne, highly flexible coating formulated with internally cross-linked acrylic copolymer, which provides a superior weather ability, no chalking, no leaching, color stability and very high resistance to Water pounding.
Click here for more information.
No comments:
Post a Comment