What is thermal insulation?
Thermal insulation is the reduction of heat transfer (the transfer of thermal energy between objects of differing temperature) between objects in thermal contact or in range of radiative influence. Thermal insulation can be achieved with specially engineered methods or processes, as well as with suitable object shapes and materials. It can keep an enclosed area such as a building warm, or it can keep the inside of a container cold. Heat is transferred by from one material to another by conduction, convection and/or radiation. Insulators are used to minimize that transfer of heat energy. In home insulation, the R-value is an indication of how well a material insulates.
To understand widely, please follow the questions below:
For example:
Less dense materials are better insulators. The denser the material, the closer its atoms are together. That means the transfer of energy of one atom to the next is more effective. Thus, gases insulate better than liquids, which in turn insulate better than solids.
An interesting fact is that poor conductors of electricity are also poor heat conductors. Wood is a much better insulator than copper. The reason is that metals that conduct electricity allow free electrons to roam through the material. This enhances the transfer of energy from one area to another in the metal. Without this ability, the material--like wood--does not conduct heat well.
A good example of this is placing a layer of clothing between you and the cold outside air in the winter. If the cold air was in contact with your skin, it would lower the skin's temperature. The clothing slows down that heat loss. Also, the clothing prevents body heat from leaving and being lost to the cold air.
Insulation from heat transfer by convection is usually done by either preventing the motion of the fluid or protecting from the convection. Wearing protective clothing on a cold, windy day will inhibit the loss of heat due to convection.
A thermos bottle not only has an evacuated lining to prevent heat transfer by conduction, but it also is made of shiny material to prevent radiation heat transfer. Radiation from warm food inside the thermos bottle is reflected back to itself. Radiation from warm outside material is reflected to prevent heating cold liquids inside the bottle.
The following is a listing of different materials with the English measurement of R-value:
BituTherm is produced in Dammam, Saudi Arabia using the latest computerized state of the art technology, Bitumat BituTherm Extruded Polystyrene panels are specially formulated to suit the very harsh Middle Eastern climatic conditions. It is an intelligent way to insulate a building.
Bitumat uses the most sophisticated German know how to ensure that the product is consistent, water resistant, reliable and able to maintain its high R Value for long periods. Bitumat BituTherm boards are made in a continuous skin surface & developed into a closed cell structure. Bitumat BituTherm maybe tested as per BS EN 13164-2001, ASTM C 578-95 or relevant DIN Standards.
Thermal insulation is the reduction of heat transfer (the transfer of thermal energy between objects of differing temperature) between objects in thermal contact or in range of radiative influence. Thermal insulation can be achieved with specially engineered methods or processes, as well as with suitable object shapes and materials. It can keep an enclosed area such as a building warm, or it can keep the inside of a container cold. Heat is transferred by from one material to another by conduction, convection and/or radiation. Insulators are used to minimize that transfer of heat energy. In home insulation, the R-value is an indication of how well a material insulates.
To understand widely, please follow the questions below:
- Where is thermal insulation used?
- How does insulation work?
- What is the R-value?
- What is the product for thermal insulation?
Where thermal insulation is used
If you have an object or area that is at a certain temperature, you may want to prevent that material from becoming the same temperature as neighboring materials. This is usually done by employing a thermal insulation barrier.For example:
- If the air outside is cold, you may want to protect your skin by wearing clothes that keep the cold out and the body warmth in.
- If your house has cool air inside during the summer, you may want to prevent the temperature from becoming the same as the hot air outside by having the house well insulated.
- If you have a hot drink, you may want to prevent it from becoming room temperature by putting it in a thermos bottle.
How insulation works
Insulation is a barrier that minimizes the transfer of heat energy from one material to another by reducing the conduction, convection and/or radiation effects.Insulating materials
Most insulation is used to prevent the conduction of heat. In some cases radiation is a factor. A good insulator is obviously a poor conductor.Less dense materials are better insulators. The denser the material, the closer its atoms are together. That means the transfer of energy of one atom to the next is more effective. Thus, gases insulate better than liquids, which in turn insulate better than solids.
An interesting fact is that poor conductors of electricity are also poor heat conductors. Wood is a much better insulator than copper. The reason is that metals that conduct electricity allow free electrons to roam through the material. This enhances the transfer of energy from one area to another in the metal. Without this ability, the material--like wood--does not conduct heat well.
Insulation from conduction
Conduction occurs when materials—especially solids—are in direct contact with each other. High kinetic energy atoms and molecules bump into their neighbors, increasing the neighbor's energy. This increase in energy can flow through materials and from one material to another.Insulation solid to solid
To slow down the transfer of heat by conduction from one solid to another, materials that are poor conductors are placed in between the solids. Examples include:- Fiberglass is not a good conductor nor is air. That is why bundles of loosely packed fiberglass strands are often used as insulation between the outer and inner walls of a house.
- Conductive heat cannot travel though a vacuum. That is why a thermos bottle has an evacuated lining. This type of heat cannot be transferred from one layer to the other through the thermos bottle vacuum.
Insulation gas to solid
To slow down the heat transfer between air and a solid, a poor conductor of heat is placed in between.A good example of this is placing a layer of clothing between you and the cold outside air in the winter. If the cold air was in contact with your skin, it would lower the skin's temperature. The clothing slows down that heat loss. Also, the clothing prevents body heat from leaving and being lost to the cold air.
Insulation liquid to solid
Likewise, when you swim in water, cold water can lower your body temperature through conduction. That is why some swimmers wear rubber wet suits to insulate them from the cold water.Insulation from convection
Convection is transfer of heat when a fluid is in motion. Since air and water do not readily conduct heat, they often transfer heat (or cold) through their motion. A fan-driven furnace is an example of this.Insulation from heat transfer by convection is usually done by either preventing the motion of the fluid or protecting from the convection. Wearing protective clothing on a cold, windy day will inhibit the loss of heat due to convection.
Insulation from radiation
Hot and even warm objects radiate infra-red electromagnetic waves, which can heat up objects at a distance, as well as lose energy themselves. Insulation against heat transfer by radiation is usually done by using reflective materials.A thermos bottle not only has an evacuated lining to prevent heat transfer by conduction, but it also is made of shiny material to prevent radiation heat transfer. Radiation from warm food inside the thermos bottle is reflected back to itself. Radiation from warm outside material is reflected to prevent heating cold liquids inside the bottle.
R-value
The R-value of a material is its resistance to heat flow and is an indication of its ability to insulate. It is used as a standard way of telling how good a material will insulate.The higher the R-value, the better the insulation.Definition
The R-value is the reciprocal of the amount of heat energy per area of material per degree difference between the outside and inside. Its units of measurement for R-value are:(square feet x hour x degree F)/BTU in the English system and
(square meters x degrees C)/watts in the metric system
Table
Insulation for the home has R-values usually in the range of R-10 up to R-30.The following is a listing of different materials with the English measurement of R-value:
| Material | R-value |
| Hardwood siding (1 in. thick) | 0.91 |
| Wood shingles (lapped) | 0.87 |
| Brick (4 in. thick) | 4.00 |
| Concrete block (filled cores) | 1.93 |
| Fiberglass batting (3.5 in. thick) | 10.90 |
| Fiberglass batting (6 in. thick) | 18.80 |
| Fiberglass board (1 in. thick) | 4.35 |
| Cellulose fiber (1 in. thick) | 3.70 |
| Flat glass (0.125 in thick) | 0.89 |
| Insulating glass (0.25 in space) | 1.54 |
| Air space (3.5 in. thick) | 1.01 |
| Free stagnant air layer | 0.17 |
| Drywall (0.5 in. thick) | 0.45 |
| Sheathing (0.5 in. thick) | 1.32 |
Reference Hyperphysics Georgia State University
The R-value is proportional to the thickness of the material. For example, if you doubled the thickness, the R-value doubles.
Bitumat Products for thermal insulation
BituTherm is produced in Dammam, Saudi Arabia using the latest computerized state of the art technology, Bitumat BituTherm Extruded Polystyrene panels are specially formulated to suit the very harsh Middle Eastern climatic conditions. It is an intelligent way to insulate a building.
Bitumat uses the most sophisticated German know how to ensure that the product is consistent, water resistant, reliable and able to maintain its high R Value for long periods. Bitumat BituTherm boards are made in a continuous skin surface & developed into a closed cell structure. Bitumat BituTherm maybe tested as per BS EN 13164-2001, ASTM C 578-95 or relevant DIN Standards.
No comments:
Post a Comment